Sony Product Detail Page - NSR1050H

The NSR1050H is an entrance model of the NSR1000 series recording servers, with physical storage capacity of 500GB. The key concepts of the NSR1050H are a “hybrid” capability – supporting both legacy analog and current IP cameras, and both Full HD/SD cameras/displays – an open-platform design, and ease of setup and operation. The NSR1050H supports 16 units of analog cameras without any adaptors. The NSR1050H supports up to 20 units of IP/analog cameras in total. The NSR1050H can be also used with up to seven units of the NSRE-S200 (2 TB Hard Disk Storage Device), allowing for the addition of 14GB storage capacity. With the NSR1050H, you can open the door to a world of new possibilities in video surveillance.

Highlights:

Hybrid recording (Analog/IP, SD/HD)
Open platform (Supports IP cameras of some other brands)
Easy setup and intuitive operation
Max. 20 cameras supported (IP/Analog total)
Max. 16 analog cameras direct connection
0.5 TB Physical Storage Capacity

HDMI outputs for Full HD displays
Supports megapixel cameras
Additional storage of NSRE-S200 (2 TB) x 7 units
Remote viewing by controller software (supplied)
Light Funnel Control
Flexible user management

Features	Benefits:
Hybrid System
Easy to migrate from analog to IP camera systems	Up to 16 analog cameras can be directly connected to the NSR-1050H. You can simply add network cameras, including megapixel cameras, while maintaining your analog cameras.
Easy to migrate to large-screen HDTV display systems	The NSR-1050H has two analog RGB and two HDMI monitor output connectors on the rear panel. You can use two out of the four outputs simultaneously in any combination to meet your system requirements
Easy to migrate into HD camera systems	To answer to the growing demands for HD (High Definition) network cameras, the NSR-1050H will offer this capability in the near future.
Open Platform
Free to select from a wide range of cameras	The NSR-1050H can be used not only with Sony network cameras but also with other major brand network cameras.
Quick Setup & Easy Operation
Quick setup	With the set-up wizard, you can set up the system in a simple manner. With Sony's IP cameras, the NSR-1050H detects the cameras instantly, which drastically reduces the time required for the system installation. Images from cameras are assigned to Monitor Layout automatically so that you can start monitoring instantly.
Intuitive graphical user interface	You can search, preview, and play back the recorded video with an intuitive user interface.
High Reliability
UPS	The NSR-1050H can be used with Uninterruptible Power Supply (UPS) equipment via the RS-232C port, protecting in the event of accidental power failure.
High Picture Quality
High frame rate display	The frame rate of the video readout of the NSR-1050H is much higher than that of conventional models.
HDMI outputs for "Full HD" displays	You can view and monitor video via the HDMI interface with Full HD (1920 x 1080) displays. If you use megapixel cameras, you can view the full resolution image with such equipment. What's more, you can set a 6-screen display layout and still view VGA video in full resolution.
With Sony IP Cameras
MPEG4/JPEG dual stream	Connected with the SNC-RX Series, SNC-DS10, SNC-DM110, and later models from Sony, the NSR-1050H can accept both JPEG and MPEG4 from the cameras at the same time. With a limited storage capacity, for example, you can monitor live video via JPEG at frame rates as high as 30 fps, and record video via MPEG4 at frame rates as low as 5 fps.
DEPA	Both the NSR & IMZ Series incorporate DEPA - Sony's Distributed Enhanced Processing Architecture. Used in conjunction with DEPA-enabled network cameras from Sony (SNC-RX Series, SNC-RZ50, SNC-CS50, and later models), DEPA helps identify critical events more easily, and provides a streamlined workflow for your video security operations.
Expandability and Flexibility
Additional storage of 2 TB x 7	The NSR-1050H has an internal storage of up to 2 TB/1 TB/0.5 TB respectively. Each can be connected with up to seven units of the NSRE-S200 (2 TB Hard Disk Storage Device).
Remote viewing by controller software	If you install the bundled Controller Software to a personal computer in a remote location, you can supervise NSR-1050H recording servers simultaneously in various locations, with flexibility in selecting and viewing live and recorded images.
IMZ-NS100 Series	In the same series of software solution, Sony also provides the IMZ-NS101/ NS104/ NS109/NS116/ NS132 Intelligent Monitoring Software. This can be installed on your own Microsoft (R) Windows (R) server to monitor and control 1/4/9/16/32 network cameras, respectively. It features the same functionality and graphical user interface as the NSR-1000 Series. The supplied Controller Software can be used for the multiple NSR-1000 Series and IMZ-NS100 Series.
Flexible user management	All access is managed by user authorization, which is set by the system administrator. The administrator can simply provide a user with the prepared five levels of operational permission, or the administrator can give a user different permission levels for different accessible cameras/servers.
Other Features	• Playback While Monitoring Live Images • Camera PTZ Control • Light Funnel Control • Multiple Hot-Spot Monitoring • Manual, Scheduled, Alarm/Event, and Pre-alarm Recording • Privacy Zone Masking • Audio Recording, Monitoring, and Playback • File Export to CD-R, DVD-R, and USB Flash Memory

Video/Recording Specifications	Detail:
Number of IP Cameras Supported	20 Max. (Total of IP/Analog)
Video Compression	MPEG-4 or JPEG
Maximum Recording Rate	120 fps
Network File System	-
Physical Capacity	500 GB
Interface	-
RAID Level / Capacity	-

Video Interface Specifications	Detail:
Video Output	No Outputs
Analog Composite OUT	-
Monitor Output Connector	OUT #1: HDMI (A-type) x1, D-sub 15pin x1 (Front), D-sub 15pin x1 (Rear) OUT #2: HDMI (A-type) x1, D-sub 15pin x1 (Rear)

Sensor Alarm Specifications	Detail:
Sensor Input	8-channel photo-coupler (DC3.3-24V)
Alarm OUT	8-channel relay (Max. 24 V 1 A)

Other Interfaces Specifications	Detail:
USB Port	Front x3 Rear x3
Serial Interface	RS-232C x1 (for UPS), RS-232C x1or RS-422/485 x1 (for Analog Camera Control)
Network	1000Base-T/100Base-TX/10Base-T x4 (automatic switching)

General Specifications	Detail:
Dimensions (W x H x D)	17 x 3 1/2 x 16 1/2 Inches (430 x 87 x 417 mm) excluding protrusions
Weight	Approx. 25 lb 6 oz (11.5 kg)
Power Requirements	100 to 127/200 to 240 V AC
Operating Temperature	41 to 104º F (5 to 40º C)
Operating Humidity	10 to 80% (inon-condensing)

Audio Interface Specifications	Detail:
Line Inut	RCA-pin L/R x1 stereo pair
Microphone Input	No

Brochure

Description:	Release Date:	Type/Size:
Intelligent Monitoring Software - NS100 Series		pdf / 1,598K	Download now
Network Surveillance Server		pdf / 1,864K	Download now

NSR1050H Next Gen Network Surveillance Recorder

Highlights:

Brochure

NSR1050H
Next Gen Network Surveillance Recorder